Martin Rice c31ffcf0f2 tweak to extruder body ...

fixed ~1mm slope in extruder feed tube, extended 1mm toward drive gear
for more support for flex filament, and added 1.75 emboss mark to the
body.

2016-01-25 23:31:48 -05:00

..

belt-guide-624.stl

remaining stls, extruder files, and a bom

2015-09-07 13:16:21 -04:00

extruder-direct-drive-3mmbody.stl

fixed a thickness error on the psu mount bracket, added beveled lower corners to y-brace, and rod clearance for y-table

2015-12-31 13:50:26 -05:00

extruder-direct-drive.stl

tweak to extruder body

2016-01-25 23:31:48 -05:00

fanduct-e3dlite6.stl

adding fan duct

2015-09-10 18:03:00 -04:00

fanduct-minimalist.stl

added a minimalist fan shroud, and an alternate servo mount that works better for some.

2016-01-24 18:42:00 -05:00

filament-mount.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

lm2596-mount.stl

beefed up lower z brackets, added holes to the LM2596 mount for alternate PCB, thickened X tensioner yoke

2015-12-11 22:00:39 -05:00

power-switch-mount.stl

added some room in the power switch mount for connectors; turned power supply mount over for easier printing

2015-12-20 15:09:42 -05:00

psu-mount.stl

fixed a thickness error on the psu mount bracket, added beveled lower corners to y-brace, and rod clearance for y-table

2015-12-31 13:50:26 -05:00

ramps-mount.stl

fixed missing slots on ramps mount

2016-01-06 22:19:16 -05:00

servo_mount.stl

remaining stls, extruder files, and a bom

2015-09-07 13:16:21 -04:00

servo-endstop-holder.stl

remaining stls, extruder files, and a bom

2015-09-07 13:16:21 -04:00

smartlcd-mount.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

x-carriage.stl

updated x-carriage

2015-11-09 19:53:56 -05:00

x-end-idler.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

x-end-motor.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

x-tensioner.stl

beefed up lower z brackets, added holes to the LM2596 mount for alternate PCB, thickened X tensioner yoke

2015-12-11 22:00:39 -05:00

y-brace.stl

fixed a thickness error on the psu mount bracket, added beveled lower corners to y-brace, and rod clearance for y-table

2015-12-31 13:50:26 -05:00

y-idler.stl

Y idler end rod holes shrunk by .4mm, lower z braces put through netfabb

2015-12-25 21:13:41 -05:00

y-motor.stl

fixed some mesh errors in the y motor and idler models

2015-11-14 10:21:40 -05:00

y-table-10.stl

fixed a thickness error on the psu mount bracket, added beveled lower corners to y-brace, and rod clearance for y-table

2015-12-31 13:50:26 -05:00

y-tensioner.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

z-lower-brace-1.stl

Y idler end rod holes shrunk by .4mm, lower z braces put through netfabb

2015-12-25 21:13:41 -05:00

z-lower-brace-2.stl

Y idler end rod holes shrunk by .4mm, lower z braces put through netfabb

2015-12-25 21:13:41 -05:00

z-lower-brace-pair.stl

beefed up lower z brackets, added holes to the LM2596 mount for alternate PCB, thickened X tensioner yoke

2015-12-11 22:00:39 -05:00

z-motor-left.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

z-motor-right.stl

Wilson II initial commit

2015-09-07 09:24:38 -04:00

z-top-left.stl

extended rod holder on z-top pieces by 5mm

2015-12-25 22:45:33 -05:00

z-top-right.stl

extended rod holder on z-top pieces by 5mm

2015-12-25 22:45:33 -05:00